A credit system is a standard way of stating how much learning a program contains and at what level. For professional training providers, whose courses vary widely in length and format, the EAHEA Credit Systems offer four independent metrics: Modular Units of Competency (MUC) for short courses and programs of 150 hours or less, Professional Advancement Credits (PAC) for professional certificates over 150 hours and associate and bachelor-level programs, Institutional Learning Credits (ILC) for postgraduate and master’s-level programs, and Executive Units of Competency (EUC) for doctoral-level executive programs.
This starter guide explains the basic ideas for a provider that is new to credits: what a credit means, which system applies, who may use the systems, how to calculate credits with an example and the first steps. The full rules are at credits.eahea.org, where the Credit Calculator also works out the numbers. Authorized providers receive the Operational Manual, which this guide does not replace.
The Idea
A credit stands for a range of hours of total nominal workload: the time a typical learner needs for instruction, practical work, guided self-study and assessment. A provider that states its programs in credits gives learners and employers a comparable measure of size. EAHEA’s credit systems are designed for private, professional, commercial and lifelong learning, and not for state higher education degrees.
The Four Systems
| System | Hours per Credit | Typical Training |
|---|---|---|
| MUC | 10 to 15 | Short courses, workshops, e-learning modules, micro-credentials, certificates of 150 hours or less |
| PAC | 20 to 25 | Professional certificates over 150 hours, associate and bachelor-level programs, vocational diplomas |
| ILC | 25 to 30 | Postgraduate certificates, master’s-level programs, MBA tracks |
| EUC | 30 to 35 | Executive doctoral programs, DBA tracks |
The 150-hour rule: a program of 150 hours or less is credited in MUC at every level.
Who May Use Them
Only authorized providers may calculate, award, state or display the credits. Authorized providers are institutions accredited by EAHEA, or providers approved for the credit systems only, through the ECS Provider Certificate, which is not an accreditation. Professional training providers, business schools, corporate academies, continuing education centers and online platforms are among those the systems serve. The names MUC, PAC, ILC and EUC are EAHEA trademarks. See the ECS Provider Certificate.
Calculating Credits in Five Steps
- Add up the workload: instruction + practical work + guided self-study × factor + assessment.
- Apply the 150-hour rule: 150 hours or less means MUC.
- Choose the system by level if above 150 hours.
- Divide total workload by your declared hours-per-credit ratio. If you declare none, the standard (midpoint) ratio applies: 12.5, 22.5, 27.5 or 32.5.
- Round once to the nearest whole credit, with a half rounding up.
The factor for guided self-study is chosen by the provider between 0.5 and 1.0, usually 0.75, and kept consistent. Breaks, travel and waiting time are not counted.
A Simple Example
A project management certificate has 40 hours of instruction, 30 hours of practical exercises, 50 hours of guided reading at a factor of 0.75 and 5 hours of assessment.
| Component | Planned | Factor | Workload |
|---|---|---|---|
| Instruction | 40 | 1.0 | 40 |
| Practical exercises | 30 | 1.0 | 30 |
| Guided reading | 50 | 0.75 | 37.5 |
| Assessment | 5 | 1.0 | 5 |
| Total | 112.5 |
The total is below 150 hours, so the credit system is MUC. At a declared ratio of 12.5, 112.5 divided by 12.5 is exactly 9, so 9 MUC. At a declared ratio of 15, it is 7.5, which rounds half up to 8 MUC. The numbers are illustrative. See calculating EAHEA credits for a short course: a worked example.
What to Put on Documents
Name the system, state the credits in standard notation (“9 MUC”), show the conversion ratio and carry the EAHEA notice that the credits are independent of ECTS, CATS and U.S. credit hours. Say what the certificate confirms and the total hours. See mandatory notice wording on transcripts.
What Credits Are Not
- Not given for attendance alone, for unassessed work experience or for events of fewer than 10 hours of total workload.
- Not ECTS, CATS or U.S. credit hours, and EAHEA defines no conversion to them.
- Not a degree. EAHEA does not award degrees.
- Not a guarantee of acceptance. The receiving institution or employer decides, though EAHEA may act as a free intermediary on request.
First Steps for a Provider
- List your programs with total hours and the assessment each has.
- Decide whether credits are useful for your audience.
- If you are accredited, you already have access. If not, consider the ECS Provider Certificate.
- Use the calculator to test your programs.
- Prepare certificates and transcripts with the right wording.
Fees for accreditation follow the World Bank country income classification and are listed on the Service Fees page. Apply online for accreditation, or contact the Secretariat to ask which route fits.
Frequently Asked Questions
A range of hours of total nominal workload: instruction, practical work, guided self-study and assessment. MUC is 10 to 15 hours, PAC 20 to 25, ILC 25 to 30 and EUC 30 to 35.
MUC, because a program of 150 hours or less is credited in MUC at every level.
Only authorized providers: institutions accredited by EAHEA or providers approved for the credit systems only.
Once, on the total workload, to the nearest whole credit, with a half rounding up.
No. EAHEA defines no conversion to ECTS, CATS or U.S. credit hours, and documents must carry a notice that the credits are independent of them.
No. The receiving institution or employer decides.